Bluetooth® Wireless Technology

Before Using the Bluetooth Hands-free

What is Bluetooth Wireless Technology?

• Bluetooth Wireless Technology refers to a short-distance wireless networking technology that uses a 2.45GHz frequency to connect various devices within a certain distance.
• Supported within PCs, external devices, Bluetooth phones, PDAs, various electronic devices, and automotive environments, Bluetooth Wireless Technology to be transmitted without having to use a connector cable.
• Bluetooth Hands-free refers to a device that allows the user to conveniently make phone calls with Bluetooth mobile phones through the system.
• The Bluetooth Hands-free feature may not be supported in some mobile phones.

Precautions for Safe Driving

• Bluetooth is a feature that enables drivers to use hands-free while driving. Connecting the head unit with a Bluetooth phone allows the user to conveniently make calls, receive calls, and manage the phone book. Before using Bluetooth Wireless Technology, carefully read the contents of this user’s manual.
• Excessive use or operations while driving may lead to negligent driving practices and be the cause of accidents. Do not operate the device excessively while driving.
• Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time.

Cautions upon Connecting Bluetooth Phone

• Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth features.
• If you do not want an automatic connection with your Bluetooth device, turn the Bluetooth feature off on the Bluetooth device.
• Park the vehicle when pairing the head unit with the mobile phone.
• Some Bluetooth features may occasionally not operate properly depending on the firmware version of your mobile phone. If such features can be operated after receiving a S/W upgrade from your mobile phone manufacturer, unpair all devices and pair again before use.

Pairing and connecting the unit and a Bluetooth phone

To use the Bluetooth feature, make sure the Bluetooth on your phone is turned on. Refer to your phone’s user guide.

,Note

According to the user profile, the Bluetooth device is stored separately.

When no phones have been paired

1. Press [] > [Phone]. Or press [] on the steering wheel remote control.

• [Cancel]: Cancels Bluetooth connection.

2. In your phone, initiate a search for Bluetooth devices. (The default vehicle name is set to the name of the vehicle you purchased.)
3. 1) If the SSP (Secure Simple Pairing) is not supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.)

2) If the SSP (Secure Simple Pairing) is supported, press [Yes] on the pop-up screen of your Bluetooth device.

4. The Bluetooth device is connected. The mobile phone contacts and the calling list are downloaded. When the connection fails, a failure message is displayed on the screen.

When a phone is already paired

1. Press [] > [Phone]. Or press [] on the steering wheel remote control.
2. Press the device from the Bluetooth device list pop-up screen. If you want to pair an additional device, press [Add new]. Follow steps 3-4 of the “When no phones have been paired” part.

When pairing additional device

1. Press [SETUP] > [Phone connection] > [Phone connections].

2. Select the device you want to connect. If there is no device you want to connect, press [Add new].

3. Select the service to connect, press [OK].
   When connecting the Bluetooth, a Hands-free connection is available only for one Bluetooth connection. But Bluetooth audio is supported for multi-connection.
4. In your phone, initiate a search for Bluetooth devices. (The default vehicle name is set to the name of the vehicle you purchased.)
5. 1) If the SSP (Secure Simple Pairing) is not supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.)

2) If the SSP (Secure Simple Pairing) is supported, press [Yes] on the pop-up screen of your Bluetooth device. (The pop-up screen may differ from the actual information of the Bluetooth device.)

6. A Bluetooth device is added. The mobile phone contacts and the calling list are downloaded. When the pairing fails, a failure message is displayed on the screen. Once the device is added to the list, you can change the connection status by pressing the name or the icon of the desired device, and select the function to use.

1 Bluetooth media () and phone service () connected

Bluetooth media and phone service are connected. You can play the audio contents in the smartphone connected through Bluetooth, or use Bluetooth phone service. (Sending / receiving phone calls and messages, and using contacts)

2 Bluetooth media () connected

Bluetooth media is connected. You can play the audio contents in the smartphone connected through Bluetooth, but the phone service is unavailable.

3Bluetooth disconnected

Bluetooth is disconnected. Bluetooth media and phone service are unavailable.

,Note

For safety reasons, pairing a Bluetooth phone is not possible when the vehicle is in motion. Park the vehicle in a safe location to pair a Bluetooth phone. It is possible to pair up to 6 mobile phones. To pair a new phone when there are already 6 mobile phones paired, you must first delete one of the previously paired phones. Some functions may not be supported due to limited Bluetooth compatibility between the car system and mobile phone. When a Bluetooth device is connected, a new device cannot be paired. If you want to pair a new phone, first disconnect the connected Bluetooth device.

Disconnecting the connected phone

1. Press [SETUP] > [Phone connection] > [Phone connections].
2. Select the icon (Hands-free or Audio) of the device to disconnect.

,Note

If you want to connect the disconnected phone again, select the disconnected phone.

Deleting Bluetooth Devices

If you do not need to use a phone any longer, you can delete it. Note that deleting a Bluetooth device will delete all calling lists and contact entries.

1. Press [SETUP] > [Phone connection] > [Phone connections].
2. Press [Delete devices].

3. Select the desired device, then press [Delete] > [Yes].

• [Mark all]: Marks all items.
• [Unmark all]: Unmark all items.

Making a call by entering a phone number

1. Press [Phone] > [J] on the Home screen.
2. Enter the phone number using the keypad on the dial screen.

3. Press [] on the dial screen or [W] on the steering wheel remote control.

,Note

If you press the wrong number, press [M] to delete one digit of the entered number.

Making a call by redialling

1. Press [Phone] > [J] on the Home screen.
2. Press and hold [] on the dial screen or [W] on the steering wheel remote control.

,Note

Redialling is not possible when there is no number in the dialed calls list.

Answering/Rejecting a call

1. If there is an incoming call, a pop-up message will appear.
2. Press [Accept] in the pop-up message or [W] on the steering wheel remote control. To reject a call, select [Reject] in the pop-up message or [Z] on the steering wheel remote control. To send a rejection message of an incoming call, select [Message] in the pop-up message.

,Note

If the caller ID service is available, the caller’s phone number is displayed. If the caller’s phone number is saved in the phone book, the caller’s name is displayed on the unit. The caller ID service's information may not always be matched with the phone book because it refers to the information from a mobile provider. Upon receiving a call, the [Reject] function may not be supported in some mobile phones.

Switching call to the mobile phone

1. If you want to switch the call to the mobile phone while talking on the car hands-free, press [Use private] on the phone call screen or press and hold [W] on the steering wheel remote control. As shown below, the call is switched to the mobile phone.

2. If you want to switch the call to the car hands-free while talking on the mobile phone, press [Use hands-free] on the screen or press and hold [W] on the steering wheel remote control. The call is switched to the car hands-free.

Ending a call

1. To end a call, press [] on the phone screen or [Z] on the steering wheel remote control.
2. The call is ended.

Using the menu during a phone call

During a phone call, you can use the following menu items.

1 Mute

Mutes/unmutes the microphone volume.

2 Volume

Sets the microphone volume.

3 Keypad

Moves to a screen for entering ARS numbers.

4 Hands-free

Switches a voice call from the car hands-free to the mobile phone.

5End

Ends a call.

,Note

You can check the phone call information during a call on the split-screen.

Calling list

Making a call from calling list

1. Press [I] on the phone screen or [W] on the steering wheel remote control.

2. Press [All], [Dialled], [Received] or [Missed].

• [All]: Displays all calling list.
• [Dialled]: Displays the outgoing calling list.
• [Received]: Displays the incoming calling list.
• [Missed]: Displays the missed calling list.

3. Press the phone number you want to call.

,Note

The calling list may not be saved on some mobile phones.

Downloading call history

You can download the call history information from your mobile phone.

1. Press [I] on the phone screen.
2. Press [] > [Download] > [Yes].

,Note

Up to 50 received, dialled, and missed call history lists can be downloaded. The download feature may not be supported on some mobile phones. Check to see that the Bluetooth device supports the download feature.

Contacts

Making a call from contacts

1. Press [F] on the phone screen. The contacts are displayed on the screen.

2. Select the contact you want to call from the list of contacts.

Downloading mobile phone contacts

You can download contacts from your mobile phone.

1. Press [F] on the phone screen.
2. Press [] > [Download] > [Yes].

,Note

Upon downloading mobile phone contacts, the previous data is deleted. This feature may not be supported on some mobile phones. Up to 5000 phone contacts lists can be downloaded.

Searching by name or number

You can search contacts for the name or number that you enter.

1. Press [F] > [] > [Search].

2. Search contacts then press [OK].
3. Select the contact you want to call.

Messages

If your smartphone supports it, you can check the text message. In some smartphones, you have to set this function to enable manually.

Checking for new messages

When you receive a message, a pop-up screen is displayed. On the text message screen, press [View], [Listen] or [Close].

• [View]: Checks the text message.
• [Listen]: Supports voice to the text message.
• [Close]: Closes the pop-up screen about the text message.

Checking and replying to text messages

1. Press [K] on the phone screen.

2. Select some content that you want to check.

• [Listen]: Supports voice to the text message.
• [Reply]: Replies to the text message.
• [Call]: Making a call by redialing.

3. Press [Reply] to return the text message.

4. Select the desired message and press [Send].

,Note

Some functions may not be supported due to limited Bluetooth compatibility.

Phone settings

This menu describes the Bluetooth connections screen.

1. Press [b] on the phone screen.
2. For more details refer to the “When no phones have been paired” part.