Others

Voice recognition system

What is voice recognition?

Voice recognition technology runs the system as ordered by recognizing your voice command to ensure the safe operation of media while you are driving the car. Regretfully, not all possible voice commands are recognized by the system due to technological limitations. To make up for these limitations, the system displays the voice commands that are available for you to use.

There are errors in communication between people. Likewise, voice recognition sometimes misunderstands your voice command in some circumstances. If this happens, either check the screen for the available options and say the command again or manually select and press the button for the corresponding command on the screen.



Voice recognition features by language

Voice recognition support availability varies according to the language set for the system.

Please verify the currently set language before using the voice recognition.

Operating voice command

Condition for a voice command system

Most of the functions can be operated by voice. Please follow the following instructions for optimal voice recognition performance.

Starting voice recognition

  1. Shortly press [66579.png] on the steering remote control.
  2. Say a command.

,Note

  • For proper recognition, please say the command after the voice instruction and beep tone.
  • Starting voice recognition, the voice command entry window with four representative commands is displayed.
  • For further details refer to the “Voice recognition” part.

Skipping Prompt Messages

While the prompt message is being stated, shortly press [66564.png] on the steering remote control.

The prompt message is immediately ended and the beep tone will sound. After the beep tone, please say the voice command.

Re-starting voice recognition

While the system waits, shortly press [66558.png] on the steering remote control.

The command waiting condition is ended and the beep tone will make a sound. After the “beep”, say the voice command.

Ending voice recognition

Adjusting voice recognition volume

While voice recognition is operating, turn the [VOL] knob on the head unit or press [VOL+ / VOL-] on the steering remote control.

Basic operation for voice command (Setting FM)

  1. Press the control on the steering wheel remote control labelled [66651.png]. The system waits for your command and displays a list of available commands on the screen.

LX2_22MY_ENG_105_210817.png

  1. If you hear a beep sound after voice guidance, say "FM".

About voice command “Commands”

  1. Press the [66704.png] on the steering wheel remote control.
  2. If you hear a beep sound after voice guidance, say "Commands". The available commands are displayed on the screen.

LX2_22MY_106_ENG_211005.png

Voice command list

Voice recognition commands are classified as “Global Commands” and “Local Commands”.

,Note

Some global and local commands will operate properly only when a USB, Bluetooth or other device has been connected.

Phone commands

Command

Operation

Call

Downloaded mobile phone contacts are displayed on the screen, and afterward, you can make a call by speaking the name.

Call <Name>

You can immediately make a call to (name) in the downloaded mobile phone contacts.

Ex.) “Call John Smith”

Call <Name> on Mobile

You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘Mobile’.

Call <Name> in Office

You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘Office’.

Ex.) “Call John Smith at Work"

Call <Name> at Home

You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘Home’.

Ex.) “Call John Smith at home”

Call <Name> on Other

You can immediately make a call to (name) in the downloaded mobile phone contacts saved as another phone category except ‘Mobile, Home, Office’. Ex.) “Call John Smith on other”

Dial number

It displays the dial number screen that you can speak the phone number.

Dial <Phone #>

You can make a call by speaking directly to the number you want to call. Ex.) Dial 123-456-7890: “Dial one two three four five six seven eight nine zero”

Change Bluetooth Device

It displays the Bluetooth connections screen.

Radio commands

Command

Operation

Radio

It runs radio that listened recently between DAB (If equipped)/FM and AM.

DAB (If equipped)/FM

It runs DAB (If equipped)/FM radio.

AM

It runs AM radio.

Media commands

Check the following before you use media commands.

  1. If media is not connected or playable files in media do not exist when you use media commands, a voice message will tell you that this is not available at present.
  2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying “USB” while USB content is playing.

Command

Operation

Music

It plays files from music that has run recently.

USB

It plays or displays a file of USB that is currently connected.

Bluetooth audio

It plays a music file of currently connecting Bluetooth mobile phone. It may not be supported according to Bluetooth connection conditions.

USB music (If equipped)

It plays a music file from the USB that is connected in the front.

Bluetooth audio commands

Global commands are available at all times. e.g.) “Bluetooth Audio”.

Navigation commands

Check the following before you use navigation commands:

  1. Search for and find addresses located in the state or province your car is currently in. If you want to search in another state, say the name of state/province and then say the address. The "Find Address" command is classified by states/provinces to provide you with faster service.
  2. Some commands such as “Cancel Route” are available only when the destination is fixed.

Command

Operation

Search address

Searches for the address and sets it as the destination. To search for an address, say “City > Street > House number” (in that order, excluding the country). e.g.) London, Eresby Place, 32 (three-two)

Find POI

Find the nearest points of interest to your current location. After this command, you can find the name of a location following the step-by-step instructions.

Find <Category>

Find <Category> nearest to your current location. For details of “Category”, see the “Find <Category>” List part.

Map

Goes to the current position on the navigation map.

Previous destinations

Displays a list of recent destinations that you can return to by saying the number on the list.

Traffic information

Goes to the Traffic Information menu screen.

Go Home

Sets your home as the destination. Your home address must be set up in the Navigation System.

Go to Office

Sets the destination to your office/place of work. Your office/place of work must be set up in the Navigation System.

Voice guidance on

Turns on the voice guidance system.

Voice guidance off

Turns off the voice guidance system.

Stop guidance

Stops the route to the fixed destination.

Resume guidance

Resumes the route guidance to the fixed destination.

Remaining time and distance

Tells you the remaining distance and time to your destination.

Route options

Restarts the route to your destination. You can then select either “Fast” or “Short”.

Route overview

Displays a map overview of the entire route to your destination.

Other Commands (Commands used in List/Help/etc.)

Command

Operation

Help

Goes to the voice recognition help screen. All available commands can then be identified and used.

Yes/No

When voice recognition is active, this command is used when an answer is requested for a confirmation question.

Line 1~4 (One-Four)

When you cannot select a certain name, such as in Call History, you can select it using numbers. Simple numbers, such as “one” and “two”, can be recognised.

Next/Previous

When five or more searched items are listed, you can move to the previous or next page using a voice command.

Manual input

When Dial or Destination search results are displayed, this command is used to search manually rather than searching using a voice command. Voice recognition stops after this command is used.

Go back

Goes back to the previous screen.

Exit

It ends the voice recognition.

“Find <Category>” List

Navigation location names may be changed after a software update.

Emergency

Hospitals

Medical services

Pharmacies

Police stations

Filling stations

Restaurants

Balkan restaurants

French restaurants

Korean restaurants

Bars or pubs

German restaurants

Spanish restaurants

Coffee shops

International restaurants

Steak houses

Chinese restaurants

Italian restaurants

Fast food

Japanese restaurants

Accommodation

Transportation

Airport

Car rental

Railway stations

Bus stations

Ferry terminals

Travel

Border crossings

Rest areas

Tourist offices

Parking

Park and ride

Garage parking

Open parking areas

Companies and public places

Cemeteries

Community centres

Post offices

City halls

Exhibition/conference centres

Schools

Business facilities

Industrial zones

Universities and colleges

Recreation and attractions

Amusement parks

Ice skating rinks

Ski resorts

City centres

Marinas

Sports centres

Golf courses

Museums

Tourist attractions

Historical monuments

Recreation facilities

Shopping

Grocery stores

Shopping centres

Wineries

Banking

Entertainment

Bowling centres

Cinemas

Nightlife

Casinos

Theatres

Hyundai service

Hyundai service

Hyundai dealers