Update

Updating system software


You can update your system with the latest software and map data. To update your system, you must install the Navigation Updater program on your PC and download the latest data by using the SD card provided with your system.
Caution
  • Depending on the total data amount, update may take several minutes.
  • Do not turn off the system or remove the storage device while the update is in progress. If the power supply is cut off or the storage device is removed from the system, it may damage the data or cause a system malfunction.
Note
  • You cannot use the USB storage device for updates.
  • When the update is complete, the system will automatically reboot and the software version information will be updated.
  • During updates, you cannot use the navigation, camera, or other infotainment system functions.
  • The regular map update schedule varies by location and model. Please contact our dealership for more information.
  • Any changes made after the update file is created are not reflected in the map. As a result, certain roads, buildings, and speed limits on the map may not be up-to-date.
  • It is recommended to keep the map data up-to-date for accurate and fast guidance.

Installing Navigation Updater

Download and install Navigation Updater. > See the Navigation Update website.
Note
  • For more information on the system requirements and how to install the program, visit the Navigation Update website. > See the Navigation Update website.
  • Map updates are guaranteed for up to eight years after your vehicle purchase and subject to expiration afterwards.

Updating system software and map data

  1. Stop the engine to turn off the system.
Caution
Make sure to stop the engine first. Removing the SD card while the system is operating may cause an error or damage the SD card or the system.
  1. Open the SD card slot, and push and pull the SD card to remove it.
Note
To find out the location of the SD card, see the Car Infotainment User's Manual that is separately provided.
  1. Insert the SD card into your PC′s SD card port.
  1. The screen allowing you to download the update files of your vehicle will appear automatically.
  1. Download the update files by following the on-screen instructions.
  1. Remove the SD card from your PC, and insert it in to the SD card slot of the system.
  1. Start the engine to turn on the system.
Note
Even when the key ignition switch is placed in the ″ON″ position, you can turn on the system and start an update.
Caution
  • To update your system with the key ignition switch in the ″ON″ position, ensure that the battery level of your vehicle is sufficient. If the battery is completely discharged during an update, the update will be interrupted and it may cause a system malfunction.
  • During the wintertime, due to low temperatures the battery discharges more quickly.
  • If you did not drive the vehicle for a long period, the battery will discharge more rapidly.
  • If you start the engine with the key ignition switch in the ″ON″ position while the update is in progress, the power supply may be cut off.
  1. On the All menus screen, press Settings > General > Version info/Update > Update > OK.
Note
  • Once the update begins, you cannot cancel it. When updating the system is complete, the system will turn off automatically.
  • When you start the engine later, the update completion notification message will appear to confirm the update. You can see the updated version information from the Version info/Update screen.
  • If you turn on the system during an update, the update progress will appear.