Bluelink (if equipped)

Using the Bluelink menu


You can use Bluelink services via the Bluelink menu in your system.
On the All Menus screen, press Bluelink.
  1. Check your vehicle for any issues and view the diagnosis. > See ″Diagnosing your vehicle (if equipped).″
  1. Access Bluelink to use it in your system or access modem information.
Warning
Distracted driving can result in a loss of vehicle control, leading to an accident, severe bodily injury, or death. The driver′s primary responsibility is the safe and legal operation of the vehicle, and the use of any vehicle systems, including the touch screen and steering wheel controls, which take the driver′s eyes, attention, and focus away from the safe operation of the vehicle, or which are not permissible by law, should never be used during the operation of the vehicle.

Diagnosing your vehicle (if equipped)

When a warning light related to the engine or transmission system turns on, you can diagnose your vehicle remotely. The information will be sent to the Bluelink Center. You can receive diagnosis results from a representative and use additional services, such as towing, route guidance to a repair shop, or reserving maintenance.
  1. If a warning light illuminates during diagnosis, park your vehicle in a safe location.
Note
You can start a diagnosis only when the vehicle stops, because some components cannot be diagnosed while the vehicle is moving.
  1. On the All Menus screen, press Bluelink > Vehicle Diagnostics.
  1. A remote diagnosis will begin.
Note
Refrain from using your system until the diagnosis is complete and the result is displayed on the screen. If you move to another screen while a diagnosis is in progress, the diagnosis will be canceled.
  1. Check the result displayed on the screen.
Note
A diagnosis result provided by this service is only an estimation based on data from your vehicle. Visit a Hyundai Motor Company Service Center or a service coordinator for a detailed diagnosis.

Configuring the Bluelink settings

You can access the settings and information for Bluelink services.
  1. On the All Menus screen, press Bluelink > Bluelink Settings.
  1. Select a desired option.
  1. To subscribe to the Bluelink service, press Activate Bluelink.
  2. To view the modem information, press Modem Information.
  3. To view the modem status, press Modem Status.