Phone

Answering a call via Bluetooth


The system screen alerts you when you receive a call while connected using Bluetooth.
Use one of the following methods:
  • Press Accept on the incoming call pop-up window.
  • Press the Call/Answer button on the steering wheel.
Warning
  • Park your vehicle in a safe location before connecting any Bluetooth devices. Distracted driving can cause a traffic accident and lead to personal injury or death.
  • Never pick up your mobile phone while driving. Use of a mobile phone may distract your attention, making it difficult to recognize external conditions and reducing the ability to cope with unexpected situations, which may lead to an accident.
Note
Once your mobile phone is connected to the system, the call sound may be output through the vehicle′s speakers even after you exit the vehicle if the phone is within the connection range. To end the connection, disconnect the device from the system or deactivate Bluetooth on the device.

Rejecting a call

Use one of the following methods:
  • Press Reject on the incoming call pop-up window.
  • On the steering wheel, press the Call button.
Note
  • To reject the call with a text message, press Message. Select a call rejection message from the list and press Send.
  • Depending on the mobile phone type, call rejection or sending call rejection messages may not be supported.
  • You can also set the system to reject calls and send call rejection messages automatically. Press Setup > Device Connections > Predefined Messages.

Using functions during a call

During a call, you will see the call screen shown below.
Press a button to perform the function you want.
  1. Return to the previous level.
  1. Display the options list.
  1. Display Off: Turn off the screen. Press the screen to turn it back on.
  2. Privacy Mode: Activate the privacy mode to protect your personal information. In the privacy mode, personal data will not be displayed.
  1. Turn off the microphone so the other party cannot hear you.
  1. Adjust the microphone volume.
  1. Switch the call to your mobile phone. Depending on the mobile phone type, this function may not be supported.
  1. End the call.
  1. Display or hide the keypad.
Note
  • If you set the microphone volume too high, the other party may have a difficulty understanding you due to noise or echoing, depending on their mobile phone and surroundings. Setting the volume to 30 or lower is recommended.
  • If the caller information is saved in your contacts list, the caller′s name and phone number will be displayed. If the caller information is not saved in your contacts list, only the caller′s phone number will be displayed.
  • You cannot switch to any other screen, such as the radio, media, or settings screen, during a Bluetooth call.
  • Depending on the mobile phone type, call quality may vary.
  • Depending on the mobile phone type, the phone number may not be displayed.

Switching between calls

If your mobile phone supports call waiting, you can accept a second call. The first call is put on hold.
To switch between the active call and the held call, use one of the following methods:
  • Press Switch.
  • Press the phone number displayed on the call screen.
Note
Depending on the mobile phone type, this function may not be supported.