Useful functions

Getting to know the driving assistance screen

You can view the outside of your vehicle on the system screen.

Warning

When reversing, make sure to follow the guidelines below:

Before entering your vehicle, always check the area behind your vehicle.
Do not solely rely on the rear view camera when reversing. Always ensure that it is safe to reverse by checking behind you and looking in the rearview mirrors.
Always reverse slowly and stop immediately if you suspect that a person, especially a child, might be behind you.

Caution

The distance shown in the rear view screen may differ from the actual distance. For safety, be sure to visually check the rear, left, and right sides of your vehicle.

Note

Depending on the vehicle model, displayed screens may vary.

Using the rear view screen

Shift to ″R″ (Reverse) while the engine is running.

The system screen will automatically display the rear view and the parking guides.

Safely park your vehicle by paying close attention to the rear view and parking guides.

Note

The example screenshots may differ from the actual system screen.

Driving direction lines (yellow)

These lines show the directions of the vehicle according to the steering angle.

Neutral direction lines (blue)

These lines indicate your vehicle′s expected path with the steering wheel in the neutral position. It can help you determine whether the vehicle is in the correct position in a parking space and prevent you from parking too close to the next vehicle.

Crash warning lines (red)

These lines are to help prevent a collision.

Note

You can set the rear view screen to remain active even if you shift to any position other than ″R″ (Reverse) after reversing (if equipped).
As you steer your vehicle, the parking guides change accordingly to indicate your vehicle′s path.

If an object comes too close to your vehicle as you are parking the vehicle, a warning beep will sound. To prevent an accident that might result if you do not hear the beep, you can set the system to decrease the volume level of any media playing automatically when you are parking the vehicle. On the All menus screen, press Settings > Sound > Driver assistance > Parking safety priority.
Even when your vehicle is in ″P″ (Park), you can check the rear view by pressing the [] button in your vehicle (if equipped).

Checking the rear top view (if equipped)

With the rear top view feature, you can look down at what is behind you on the rear view screen.

On the rear view screen, press .

Check the top view and assist guides.

The following guides are displayed on the rear top view screen:

The parking guides indicate the space necessary to open the trunk (tailgate) of your vehicle. It can help you see if there is enough space to open the trunk (tailgate) after parking and if there is any obstacle to opening it.
An extension of your vehicle′s centre appears. It shows the path of your vehicle′s centre according to the steering angle.

Checking the rear view while driving (if equipped)

You can check the rear view via the system screen while driving.

To access the rear view while driving, press the [

] button in your vehicle.

The rear view is displayed on the screen and appears.
To deactivate the rear view screen, press [] button again.

Configuring the rear view settings

You can adjust the brightness and contrast of the camera screen.

On the rear view screen, press

To adjust the brightness and contrast of the camera screen, press Display settings.

Surround View Monitor (if equipped)

The surround view monitor feature enables you to view the surroundings of your vehicle by using multiple cameras installed in the vehicle.

Checking your surroundings while driving

To access the surround view, press the [] button in your vehicle.

The front view with the surround view is displayed on the screen.

Note

The surround view monitor is activated only in the following conditions:

When you are driving at 15 km/h or slower in ″D″ (Drive)
When you stop in ″D″(Drive) or ″N″ (Neutral)

Press one of the icons on the screen to check the corresponding direction.

Icon	Description
	Check the front view and the surround view.
	Check the wide front view.
	Check the front view and front-left view.
	Check the front view and front-right view.
	Check the rear view while driving. On the screen, appears. (if equipped)
	Change the surround view screen settings.

Note

If an open door or trunk (tailgate) or a folded outside rearview mirror is detected while the surround view monitor is active, an alert icon will appear on the screen.
To deactivate the surround view screen, press the [] button.

Checking your surroundings while reversing

Shift to ″R″ (Reverse) while the engine is running.

The rear view is displayed on the screen.

Note

If you shift to ″P″ (Park), the surround view monitor will not work.

Press one of the icons on the screen to check the corresponding direction.

Icon	Description
	Check the rear view and the surround view.
	Check the wide rear view.
	Check the rear view and rear-left view.
	Check the rear view and rear-right view.
	Check the rear top view (if equipped).
	Change the surround view screen settings.

Note

When you are reversing, the icon for accessing the rear view while driving is not available.

Checking the rear top view (if equipped)

With the rear top view feature, you can look down at what is behind you on the surround view screen.

On the surround view screen, press .

Check the top view and assist guides.

The following guides are displayed on the rear top view screen:

The parking guides indicate the space necessary to open the trunk (tailgate) of your vehicle. It can help you see if there is enough space to open the trunk (tailgate) after parking and if there is any obstacle to opening it.
An extension of your vehicle′s centre appears. It shows the path of your vehicle′s centre according to the steering angle.

Configuring the surround view monitor settings

On the surround view screen, press .

Select one of the following options and change the setting:

To set to display the parking guides on the rear view screen, press Reference lines.
To set to receive a warning message when the surround view monitor detects an object close to the front or rear of your vehicle, press Proximity warnings.
To select a default view to be displayed when you activate the surround view monitor while driving, press Front view mode.
To select a default view to be displayed when you activate the surround view monitor while reversing, press Rear view mode.
To adjust the brightness and contrast of the camera screen, press Display settings.