Configuring the cluster settings
Change settings for cluster.
- Available settings may differ depending on the vehicle model and specifications.
- On the Home screen, press Setup ► Cluster.
The cluster settings screen appears.
- Configure the settings as required.
- Press
on the screen or press the [SEARCH] button on the control panel, enter a search term, and then select the item to run.
Cluster (if equipped)
Set the data to display on the instrument cluster and the guiding beep.
Brightness
Set the screen brightness to adjust automatically, or manually set it to stay at a constant brightness level.
Cluster Theme Selection
Selects the theme to be used in the Cluster display.
AUTO STOP Timer Reset (if equipped)
Selects how to reset the AUTO STOP Timer's cumulative time.
Content Selection
Selects the contents to be shown on the cluster display.
- Wiper/Lights Display: Displays a pop-up confirming the wiper/lights selected setting.
- Traffic Signs: Displays traffic information, such as speed limits.
- Icy Road Warning: Provides a warning when the road may be icy, when the outside temperature is below about 39°F (4°C).
- Blind-Spot View Monitor: Displays the Blind Spot view in the cluster when operating the turn signal switch.
Welcome Sound
Provides an audible tone when the cluster turns On or Off.
