Navigation

Navigation functions (if equipped)

You can use the navigation system conveniently through various functions on the Navigation Menu screen.

Perform any of the following methods:

  • •  On the All menus screen, press Navigation.
  • •  On the control panel, press the [NAV] button.

Type1

Type2

  1. Search for a location by entering various types of keywords such as place name, address, or coordinates. ▶  See "Searching by keyword."
  2. Search for a location by using the point of interest (POI) categories. ▶  See "Searching for nearby POI(Points of Interest)."
  3. Select one of the destinations you entered previously. ▶  See "Searching from previous destinations."
  4. Select one of the locations stored in your saved places. ▶  See "Using saved favourite places (if equipped)."
  5. Search for Hyundai service easily. ▶  See "Searching for Hyundai service."
  6. Cancel guidance to the destination.
  7. View information on the entire route to the destination. ▶  See "Avoiding specific zones."
  8. Edit the tourpoint on the way to the destination.
  9. Reroute by changing the route search option. ▶  See "Changing the route search option."
  10. Save your home, office or other frequently visited places as a favourite location to making searching easier.
  11. The list of menu items appears.
    • •  Display Off: Turns off the screen. To switch the screen back on, press the screen or briefly press the power button (if equipped).
    • •  Edit navigation menu icons: Can change the location of an icon on the Navigation Menu screen.
    • •  Manual: Displays the QR code that provides access to the online user manual for the system.
    • •  Split screen: Can turn on or off the split screen mode (if equipped).
  • Available icons and their arrangement may differ depending on the vehicle model and specifications.
  • If the vehicle is type 2, it is possible to change the graphic theme to white or black. ▶  See "Graphic themes (if equipped)."

Warning

Driving while distracted may cause a loss of vehicle control, potentially leading to an accident, severe personal injury, or death. The driver's primary responsibility is the safe and legal operation of a vehicle, and any handheld devices, equipment, or vehicle systems which divert the driver's attention from this responsibility should never be used during operation of the vehicle.

  1. On the All menus screen, press Navigation ▶ Search.
    • Press and hold the [NAV] button on the control panel to enter into Search.
  2. Enter the location data such as place name, address or coordinates and then press OK.
  3. Select a location from the search result list.
    • You can see the sites in the list on the preview screen.
    • To sort the search results in a different order, press on the attribute to toggle between options.
    • The Add tourpoint menu appears when a destination has been set.
  4. Check the location of the destination and then press Set as destination.
    • If you press Parking at the bottom right of the screen, the map screen displays the location icon of the parking lot.
  5. Select a route and press Start guidance.
    • The screen may differ depending on the vehicle model and specifications.

Caution

The information on the map may differ from actual road conditions depending on the location of the vehicle.

  • •  Digitalised roads may not be identical to the actual roads. When guidance does not match the actual route, drive the vehicle according to actual road conditions.
  • •  The system may provide guidance that differs from the actual route due to a change in road conditions. When guidance does not match the actual route, drive the vehicle according to road conditions with observing the traffic regulations. When the vehicle reaches a zone that matches the actual route, the system guides the route correctly.
  • Vehicle position may not be displayed correctly if:
    • The vehicle is driving on a Y-shaped or winding road with narrow angles.
    • The vehicle is driving closely to another road.
    • The vehicle is driving on a road where there are many tall buildings in the vicinity.
    • The vehicle is driving on a new road or a road under construction.
    • The vehicle is transported by a ferry or heavy-duty transport vehicle.
    • The vehicle is driving in a rugged mountain area or on a steep curve road.
    • The vehicle is entering a public road after making a turn through the turntable in an underground parking lot or multi-story parking lot.
    • The vehicle stops and starts repeatedly or moves slowly in front of an intersection.
    • The system reboots after the vehicle battery has been recharged or replaced.
    • You are driving in slippery conditions, such as in heavy sand or snow.
    • The tyres have been replaced recently or studless tyres or spare tyres are used.
    • When improper-sized tyres are used or the pressure of each tyre is different.
    • The replaced tyre is worn out and especially, studless tyres have been used for more than two seasons.
    • A roof carrier is installed on your vehicle.
    • On a highway continued driving causes the system to perform map matching or apply the updated GPS data.
  • Navigation service may not be provided correctly under the following conditions:
    • When the vehicle drives on a straight road continuously, the system may guide you to drive straight. It is not a malfunction.
    • Guidance may not be followed immediately after the vehicle makes a turn at an intersection or drives through an intersection.
    • The system may guide you to make a U-turn in a prohibited area.
    • The system may guide you to a traffic-blocked road (e.g. no-entry road or road under construction).
    • The system may guide you to a road away from the destination when there is no road to the destination or there are only narrow roads on the way.
    • Guidance may not be proper when the vehicle is off the route.
    • Guidance may not match the actual distance on an overpass or underpass due to the difference of the start point.
    • When you are driving at high speeds, route recalculations may take longer.
  • Because the navigation system is used for information purposes only, Hyundai does not assume responsibility of the accuracy of the information.

The map screen provides various functions and informations, as follows:

  1. Displays the Home screen.
  2. Used to change the map display mode.
    • •   (2D North up): Displays the map with the north fixed at the top.
    • •   (2D heading up): Rotates the map depending on the driving direction.
    • •   (3D heading up): Rotates the map depending on the driving direction for 3D view.
  3. Adjust the navigation sound volume.
  4. Zooms in the map.
  5. Set the map scale change mode to automatic or manual.
  6. Zooms out the map.
  7. Displays the point to change the driving direction.
  8. Displays the next point to change the driving direction.
  9. Displays the rest areas on the route.
  10. Can see the lane information.
    • •  Blue: Recommended lane
    • •  White: Available lane
    • •  Gray: Unavailable lane
  11. Displays quick menu items.
  12. Stop the navigation guidance. ▶  See "Canceling the route guidance."
  13. Displays the remaining distance to the destination and the estimated time of arrival. For more details, press the information item.
  14. Displays or hides the detailed guidance.
  • The screen may differ depending on the vehicle model and specifications.

Using the detailed guidance

When the vehicle needs to change the driving direction or lanes, a zoomed-in map automatically appears.

  • To display or hide the detailed guidance, press or .
  • The screen may differ depending on the vehicle model and specifications.

When the detailed guidance appears while driving, select and perform the desired function.

  • •  To view basic information including sections for turns, press Simple.
  • •  To check the types of convenience facilities in a rest area, press Rest area.
  • •  For information details about each zone such as intersections, interchanges, and rest areas, press Detailed.
  • The screen may differ depending on the vehicle model and specifications.

You can adjust the volume of navigation or GPS warning sound.

On the map screen, press and then press or , or use the control bar to adjust the volume.

  • To have the navigation sound always output first over media sound, check Navigation prioritised.
  • To turn off the navigation guidance, press and then press .
  • To turn off the navigation alerts, press and then press .
  • The screen may differ depending on the vehicle model and specifications.

To cancel route guidance, press Cancel route. Alternatively, press Navigation ▶ Cancel route on the All Menus screen.

The destination displayed at the bottom of the screen disappears and changes to .

  • Press to search for the target destination to obtain an optimum route.
  • To maintain the specified destination and stop the route guidance, press and hold Cancel route at the bottom of the screen. The guidance stops and the Resume guidance button appears. You can use the button to search for a previous destination and resume route guidance.