Activating DMB

Regarding DMB Broadcasting Reception

Terrestrial (VHF) DMB is a broadcasting service for mobile media.

Depending on the area, the reception condition may differ.

However, for the safety, the video is not available while only the audio is played.

When receiving a DMB channel, the strength of wave may differ depending on the reception area or the reception can be degraded due to interferences. Therefore, if the reception is degraded, search the channel again by [Channel Search] menu.

The video can be degraded or the reception may fail especially in following areas:

• Since DMB wave travels in very straight fashion, if there is any interference such as buildings or valleys, the reception condition becomes bad.
• At a location near to the power lines of trolley, high power line or neon sign, the video may stop or noise may be produced.
• The video can be erased or noise lines can be produced at a location near to a transmission antenna or steel tower of armature radio station.
• In an automobile, if a mobile phone, wireless communication device or other electronic devices is used, the video can be stopped or noises can be produced.
• In a far distance from the station, the wave is weak so that the reception condition can be degraded.

,Reference

DMB TV reception may fail due to the local programing schedule, the station circumstance or the wave environment. And the program may change due to the broadcasting transmission type change. This receiver can receive DMB TV signals and supports data services (KBS TPEG) as well. The screen automatically changes according to the mode corresponding to the selected DMB TV channel. The mode of DMB TV is not separately controlled, yet, is determined according to the transmission format of the station.

Activating DMB Mode

Press [DMB] on the home screen.

Or, press the [HOME] button on the front seat control key and select [DMB] with the controller.

,Reference

For the safety, the DMB video is supported only when the gear is at P position. For the safety, the Video is not supported and other partial features are restricted while the vehicle is in driving condition. However, the audio is played. Even when the vehicle stops, if the gear is not in P position, the video is not supported.

Initial channel search Method (If no searched channel, or After the factory release)

Searches channels if DMB is watched for the first time or no channel has been registered.

1. Press [DMB] on the home screen. Initial channel search screen opens.
2. To channel search, press [Yes].

To cancel channel search, press [Cancle].

,Reference

During Initial channel search, if the channel search is canceled, switches to the previous AV.

3. When channel search is completed, the first searched channel is automatically received.

,Reference

When DMB channels are searched, TV and Radio channels are searched simultaneously.

Searching Broadcasting Channels

If no broadcasting is available in a new area, the corresponding broadcastings in the area will be available by searching channels.

1. Press [Menu] > [Channel Search] in DMB mode.

Selecting [Stop] during channel search stops searching for channels and the channel previously watched will be played.

2. When channel search is completed, the first searched channel is automatically received.

Selecting a Broadcasting Channel

Selecting by screen touch (Only available on front screen)

Drag DMB channel list up/down and press a desired broadcasting channel.

Selecting by using the button on head unit

Turn [TUNE/FILE] button on head unit to left/right or press [SEEK W/TRACK S] button to select a desired broadcasting channel.

Selecting by using steering wheel remote control

Press [S/W] button of steering wheel remote control to select a desired broadcasting channel.

Moving DMB Channel List

You can change the channel stored in DMB channel list in the desired order.

1. Press [Menu] > [Move channel list] in DMB channel list.
2. Press and hold the channel right reorder button to move it to the desired order.

Editing DMB Channel List

You can on/off the stations to be displayed in the DMB channel list.

1. Press [Menu] > [Edit channel list] in DMB channel list.

2. When the left box is checked, it is displayed in the DMB channel list, and if you do not want to display it in the channel list, uncheck the left box.

Switching DMB Display Screen (DMB List Screen/DMB Full Screen)

Touching on the screen switches to DMB list screen/DMB full screen.

,Reference

Pressing [] on DMB list screen or Pressing [Menu] > [Full Screen] switches to DMB full screen. The menu selection by the touch button is only available on the front screen.

Emergency Broadcasting List

Emergency Broadcasting List View

May check the list of flood, earthquake, heavy rain or other emergency broadcastings.

Press [Menu] > [Emergency Info] in DMB channel list.

Deleting Emergency Broadcasting List

1. Press [Menu] > [Delete] in emergency broadcasting list.
2. Select the desired item, then press [Delete] > [Yes].

Display Settings

1. Press [Menu] > [Display Settings] in DMB channel list.
2. Reference "Display Settings" for features of screen settings.

Sound Settings

1. Press [Menu] > [Sound Settings] in DMB channel list.
2. Reference "Sound Settings" for features of screen settings.