Settings

Configuring the vehicle settings

You can configure the functions for driving and related environments.

  • Available settings may differ depending on the vehicle model and specifications.

Caution

Make sure you stop the vehicle before changing settings to ensure safety.

  • Vehicle settings can be changed only when the vehicle is on.
  • Available settings may differ depending on the vehicle model and specifications.
  • Depending on the climate control system, some functions may not be supported.
  1. On the All menus screen, press Settings ▶ Vehicle.

    The vehicle settings screen appears.

  2. Configure the settings required:
  • Press ▶ Search for settings or press and enter a keyword to search for a setting item.

You can set to use various systems that assist the driver for safety.

  • The screen may differ depending on the vehicle model and specifications. Refer to the car owner's manual for details of the function.

Warning

  • •  Be sure to always check the road conditions while driving. The Driver Assistance system helps you drive safely and conveniently. Relying solely on the function may cause violation of traffic rules and regulations, resulting in an accident.
  • •  Be sure to control the vehicle using your best judgment and follow traffic regulations for safety. When the function is active, drive the vehicle keeping your eyes forwards and checking surroundings.
  • •  Not all warnings and functions are necessary when they are active, and they do not replace driver discretion under any circumstances. Stay focused on the road while driving.

Caution

Be sure to always check the vehicle surroundings while driving. The equipped cameras and sensors may not operate properly under all driving conditions.

Parking safety (if equipped)

Sets the properties of the Parking Safety systems.

  • •  Camera settings: Sets the properties of the cameras.
    • Display settings: Adjust the brightness and contrast of the view screen. To initialise all Surround View or Rear View screen settings of the phone projection, press Default.

Warning

  • •  Even though the vehicle is equipped with the Parking Safety system, be sure to check for obstacles in the surroundings while driving. Relying on the Parking Safety system may cause an accident. Accordingly, be sure to control the vehicle by using your best judgment.
  • •  When the sensors cannot detect any obstacles due to the detection limit, it may cause an accident. Be sure to always check the surroundings while parking.

You can change the vehicle settings for driving conditions.

Drive mode change alert (if equipped)

Configure the setting so that drive mode change notification is displayed along with the vehicle image when the drive mode is changed.

You can set the data to display on the instrument cluster and the volume and type for guiding beep.

Brightness (if equipped)

You can set the system brightness to be adjusted according to the ambient lightingconditions or set the screen to stay bright or dimmed ▶ See "Brightness."

Select theme (if equipped)

Select and apply a theme to the cluster.

  • •  Cube: Uses cube graphics in the cluster display (if equipped).
  • •  Link to drive mode: Cluster theme changes automatically based on the Drive mode.

Fuel economy auto reset (if equipped)

You can set to automatically initialise the average fuel economy.

  • •  After vehicle On: The average fuel economy is automatically initialise whenever you drive the vehicle.
  • •  After refuelling: The average fuel economy is automatically initialise whenever you refuel the vehicle.
  • •  Off: The average fuel economy initialise is unavailable.

Content selection (if equipped)

You can set the content to display on the instrument cluster.

  • •  Gear position pop-up: When the gear is shifted, the information pop-up appears.
  • •  Wiper/Lights display: When the wiper or light lever operates, the operation mode appears.

Cluster voice guidance volume (if equipped)

You can adjust the voice guidance volume of the cluster.

Welcome sound (if equipped)

You can set to generate the notification sound when turning on or off the instrument cluster.

You can configure the operation environment for climate control system.

Automatic ventilation (if equipped)

You can set to prevent condensation inside and keep inside air pleasant using this feature.

  • •  Auto dehumidify: Once the inside air circulation mode has been used for a long time, it is switched to the outside air inflow mode to prevent condensation.

You can configure the settings for vehicle lights.

One-touch turn indicator (if equipped)

You can set the number of turn signal lamp flashes when the lamp lever is operated.

Welcome mirror/light (if equipped)

You can set the welcoming time on the outside rear view mirrors.

  • •  On door unlock: The welcome feature is enabled by the door unlock event.
  • •  On driver approach: When the driver with the smart key approaches, the welcome feature is enabled.

Headlight time-out (if equipped)

You can set to turn off the taillights and headlights in 15 seconds after turning off the vehicle to ensure visibility.

Interior lights On (if equipped)

Illumination of the interior buttons and switches at all times.

You can configure the operation environment for the trunk and doors.

Auto lock (if equipped)

You can set the time to automatically lock all doors.

Auto unlock (if equipped)

You can set the time to automatically unlock all doors.

Horn Feedback (if equipped)

You can set to generate guiding beep when all doors are locked.

Two Press Unlock (if equipped)

You can set to unlock all doors by pressing the door unlock button twice.

  • When you press the door unlock button once, only the driver's seat door is unlocked.

You can configure the features for convenience such as welcome sound and wireless charging.

Service interval (if equipped)

You can set to guide you when to perform the vehicle inspection.

  • •  Enable service interval: Sets the service inspection interval. When it exceeds, the notification is provided.
  • •  Distance: Sets the driving distance for a service.
  • •  Duration: Sets the service cycle.
  • •  Default: Initialises the settings for distance and duration.

Wireless charging system for mobile devices (if equipped)

You can set to charge your smartphone wirelessly.

  • This feature is available only in smartphones that can be charged wirelessly.

Auto rear wiper (reverse) (if equipped)

Activates the rear windshield wiper automatically when the front wiper is On and the gear is in reverse.