Navigation

Navigation functions

You can use the navigation system conveniently through various functions on the Navigation Menu screen.

Perform any of the following methods:

  • •  On the All Menus screen, press Navigation Menu.
  • •  On the control panel, press the [NAV] button.
  1. Returns to the previous screen.
  2. Customize the navigation settings.
  3. Search for a location by entering various information such as place name and address. ▶ See "Searching with location information."
  4. Search for a location by using the point of interest (POI) categories. ▶ See "Searching for nearby points of interest."
  5. Select one of the destinations you searched previously. ▶ See "Searching from previous destinations."
  6. Select one of the locations saved in your saved places. ▶ See "Using saved favorite places."
  7. Search for Hyundai Dealerships easily. ▶ See "Searching for Hyundai Dealerships."
  8. Cancel the guidance to the destination. ▶ See "Canceling the route guidance."
  9. Check information on the entire route to the destination.
  10. Edit the waypoints on the way to the destination. ▶ See "Editing the route."
  11. Reroute by changing the route search option. ▶ See "Changing the route search option."
  12. Check the accident and construction zone alerts (if equipped). ▶ See "Checking traffic information (if equipped)."
  13. Save your home, office or other frequently visited places as a favorite place to search easily.
  14. The list of menu items appears.
    • •  Reorder Icons: Change the position of an icon on the Navigation Menu screen.
    • •  User's Manual on Web (QR Code): Displays the QR code that provides access to the online user's manual for the system.
    • •  Split Screen: Can turn on or off the split screen mode (if equipped).
  • Available icons and their arrangement may differ depending on the vehicle model and specifications.

Warning

Driving while distracted may cause a loss of vehicle control, potentially leading to an accident, severe personal injury, or death. The driver's primary responsibility is the safe and legal operation of a vehicle, and any handheld devices, equipment, or vehicle systems which divert the driver's attention from this responsibility should never be used during operation of the vehicle.

  1. Perform any of the following methods:
    • •  On the All Menus screen, press Navigation Menu ▶ Search.
    • •  On the map screen, press .
    • Press and hold the [NAV] button on the control panel.
  2. Enter the location information such as place name, address, or coordinates and then press OK.
    • The screen may differ depending on the vehicle model and specifications.
  3. Select a destination from the search result list.
    • You can see the locations in the list on the preview screen at the right.
    • To sort the search results in a different order, press the toggle button.
  4. Check the location of the destination and then press Route.
    • The screen may differ depending on the vehicle model and specifications.
  5. Select a route and press Start Guidance.

Caution

Distracted driving or negligence in keeping your eyes forward may cause a loss of vehicle control. Never use any devices or systems that take the driver's attention away from driving.

  • The information on the map may differ from actual road conditions, depending on the location or driving conditions.
    • Digitalized roads may not be identical to the actual roads. When guidance does not match the actual route, drive the vehicle according to actual road conditions.
    • The system may provide guidance that differs from the actual route due to a change in road conditions. When guidance does not match the actual route, drive the vehicle according to road conditions with observing the traffic regulations. When the vehicle reaches a zone that matches the actual route, the system guides the route correctly.
  • Vehicle location may not be displayed correctly if:
    • The vehicle is driving on a Y-shaped or winding road with narrow angles.
    • The vehicle is driving closely to another road.
    • The vehicle is driving on a road where there are many tall buildings in the vicinity.
    • The vehicle is driving on a new road or a road under construction.
    • The vehicle is transported by a ferry or heavy-duty transport vehicle.
    • The vehicle is driving in a rugged mountain area or on a steep curve road.
    • The vehicle is entering a public road after making a turn through the turntable in an underground parking lot or multi-story parking lot.
    • The vehicle stops and starts repeatedly or moves slowly in front of an intersection.
    • The system reboots after the vehicle battery has been recharged or replaced.
    • The vehicle is driving on a slippery road due to heavy snow, etc.
    • The tires have been replaced recently or spare tires (or studless tires) are used.
    • Improper-sized tires are used or the pressures of each tire are different.
    • The replaced tire is worn out or the studless tires have been used for over two seasons.
    • A roof carrier is installed on the vehicle.
    • On a highway continued driving causes the system to perform map matching or apply the updated GPS data.
  • Navigation service may not be provided correctly under the following conditions:
    • When the vehicle drives on a straight road continuously, the system may guide you to drive straight. It is not a malfunction.
    • Guidance may not be followed immediately after the vehicle makes a turn at an intersection or drives through an intersection.
    • The system may guide you to make a U-turn in a prohibited area.
    • The system may guide you to a traffic-blocked road (e.g. no-entry road or road under construction).
    • The system may guide you to a road away from the destination when there is no road to the destination or there are only narrow roads on the way.
    • Guidance may not be proper when the vehicle is off the route.
    • Guidance may not match the actual distance on an overpass or underpass due to the difference of the start point.
    • When you are driving at high speeds, route recalculations may take longer.
  • Because the navigation system is used for information purposes only, Hyundai does not assume responsibility of the accuracy of the information.

The map screen provides various functions and informations, as follows:

Option A

Option B (EV only)

  1. Displays the Home screen.
  2. Change the map display mode.
    • •   (North Up 2D): Displays the map with the north fixed at the top.
    • •   (Heading Up 2D): Rotates the map depending on the driving direction.
    • •   (Heading Up 3D): Rotates the map depending on the driving direction for 3D view.
  3. Adjust the navigation sound volume.
  4. Zooms in the map.
  5. Set the map scale change mode to automatic or manual.
  6. Zooms out the map.
  7. You can see the system information on the map. (It can display up to two items.)
    • •  Software update progress
    • •  Wireless charging status
    • •  Bluetooth connection status
  8. Displays the point to change the driving direction.
  9. Displays the next point to change the driving direction.
  10. Displays the rest areas on the route.
  11. Displays the lanes in different colors.
    • •  Blue: Recommended lane
    • •  White: Available lane
    • •  Gray: Unavailable lane
  12. Displays quick menu items.
  13. Stop the navigation guidance.
  14. Displays the remaining distance to the destination and the estimated time of arrival. For more details, press the information item.
  15. Displays or hides the detailed guidance.
  16. Check the range you can drive with the current amount of battery (EV only).
  • To see only the map with no destination, press the map area on the Home screen or on the All Menus screen, press Map. Or press the [MAP] button on the control panel.
  • The screen may differ depending on the vehicle model and specifications.

Using the detailed guidance

When the vehicle needs to change the driving direction or lanes, a zoomed-in map automatically appears.

  • To display or hide the detailed guidance, press or .
  • The screen may differ depending on the vehicle model and specifications.

When the detailed guidance appears while driving, select and perform the desired function.

  • •  To check the basic information including sections for turns, press Simple.
  • •  To check the rest area on the route, press Rest Areas.
  • •  To check the detailed information about each zone such as intersections, interchanges, and rest areas, press Details.
  • The screen may differ depending on the vehicle model and specifications.

You can adjust the volume of navigation or GPS warning sound.

On the map screen, press and then press or , or use the control bar to adjust the volume.

  • To prioritize the navigation sound while playing media, check Navigation Volume Priority.
  • To turn off the navigation voice, press and then press .
  • To turn off the navigation sound effects, press and then press .
  • During the guidance, use the Volume knob on the control panel or the Volume lever/button on the steering wheel to adjust the navigation volume.

To cancel the route guidance, press Cancel Route.
Otherwise, press Navigation Menu ▶ Cancel Route on the All Menus screen.

The destination displayed at the bottom of the screen disappears and changes to .

  • Press to search for the target destination to obtain an optimum route.
  • To maintain the destination and stop the route guidance, press and hold Cancel Route at the bottom of the screen. The guidance stops and the Resume Route button appears. You can use the button to search for a previous destination and resume the route guidance.