Configuring the cluster/head-up display settings

Change settings related to the cluster and/or head-up display (HUD).

Available settings may differ depending on the vehicle model and specifications.

On the Home screen, press Setup ▶ Cluster/Head-Up Display.
The cluster/HUD settings screen appears.
Configure the settings as required.

Press on the screen or press the [SEARCH] button on the control panel, enter a search term, and then select the item to run.

Cluster (if equipped)

Set the data to display on the instrument cluster and the guiding beep.

Available settings may differ depending on the vehicle model and specifications.

Set the screen brightness to change automatically, or manually set it to stay at a constant brightness level.

Selects the theme to be used in the Cluster display.

Selects how to reset the AUTO STOP Timer's cumulative time.

Selects the contents to be shown in the cluster display.

• Wiper/Lights Display: Displays a pop-up confirming the wiper/lights selected setting.
• Traffic Signs: Displays traffic information, such as speed limits.
• Icy Road Warning: Provides a warning when the road may be icy, when the outside temperature is below about 39℉ (4℃).
• Blind Spot View Monitor: Displays the Blind Spot view in the cluster when operating the turn signal switch.

Provides an audible tone when the cluster turns On or Off.

Selects the drive modes in which the tachometer is displayed.

Configure settings for the head-up display, which displays information such as driving speed and road-related information while driving.

Available settings may differ depending on the vehicle model and specifications.

Displays information on the windshield.

Adjust the height, rotation, and brightness of the head-up display.

• Automatically Save HUD Height and Rotation Settings: Automatically saves all adjustments to the HUD height and left/right rotation settings after the IMS System has been activated.

Selectively turn on or off the information displayed on the heads-up display.