Configuring the vehicle settings

Configure driving-related features and other vehicle settings.

Caution

Make sure you stop the vehicle before changing settings to ensure safety.

Vehicle settings can be changed only when the vehicle is turned on.
The screen may differ depending on the vehicle model and specifications.
Available settings may differ depending on the vehicle model and specifications.
Some features may not be supported, depending on the climate control system.

On the Home screen, press Settings ▶ Vehicle.
The vehicle settings screen appears.
Configure the settings as required.

Press on the screen or press the [SEARCH] button on the control panel, enter a search term, and then select the item to run.

Driver assistance (if equipped)

Configure settings for various driver-assist systems, to ensure safety.

Available settings may differ depending on the vehicle model and specifications. Refer to the car owner's manual for further information about the features.
To switch the view mode for driver assist features between the image view and list view, press ▶ Change menu display. The default mode is the image view.

Warning

• Be sure to always check the road conditions while driving. The Driver Assistance system helps you drive safely and conveniently. Relying solely on the function may cause violation of traffic rules and regulations, resulting in an accident.
• Be sure to control the vehicle by your judgement and keep traffic regulations for safety. When the function is active, drive the vehicle with keeping eyes forward and checking the surroundings.
• Not all warnings or functions are necessary when they are active, and they do not replace the driver discretion under any circumstances. Stay focused on the road while driving.

Caution

Be sure to always check the vehicle surroundings while driving. The equipped cameras and sensors may not operate properly under all driving conditions.

Warning methods

The warning methods for the Driver Assistance systems

• Warning volume: The volume of the warning sounds
• Haptic warning: Activation of the steering wheel vibration warning
• Lane Safety audible warning Off: Deactivation of the Lane Safety audible warning, even if both warning volume and haptic warning are On.
• Forward attention warning sound: Turn the forward attention warning sound On or Off.
• Driving safety priority: Lowering of all other audio volumes when a driving safety warning sound is played
• Parking safety priority: Lowering of audio volumes when a parking assist view is active

Driving Convenience

The properties of the Driving Convenience system

The Driving Convenience system operates based on the information from the navigation system so you must use the system only when the navigation system operates properly.

• SCC (Smart Cruise Control): The properties of the Smart Cruise Control system
- To reset the Smart Cruise Control settings, press Reset.
• HDA (Motorway Driving Assist): Assistance for driving on motorways according to the set speed and distance while keeping the vehicle centred in the lane
• Lane change assist (motorway): Automatic assistance for lane changes when the turn indicator is used while HDA (Motorway Driving Assist) is active
• Auto motorway speed change: Automatic adjustment of the vehicle speed on a motorway based on navigation data
- It operates based on the speed cameras on the route set from the navigation system. To change the guidance settings for speed cameras, on the Home screen, press Settings ▶ Navigation ▶ Alerts ▶ Camera alert settings.

Speed limit

The properties of the Speed Limit system

• Speed limit assist: Adjustment of the vehicle's set speed based on the current road's speed limit and the selected offset when operating the +/- switch. Press and hold the mute button on the steering wheel to easily switch to the speed limit information function.
• Speed limit warning: Provision of a warning when exceeding the current road's speed limit. Press and hold the mute button on the steering wheel to easily switch to the speed limit information function.
• Speed limit information: Display of the current speed limit of the road. Press and hold the mute button on the steering wheel to easily switch to the speed limit information function (if equipped).
• Off: Disabling of the speed limit functions that operate on the basis of the current road's speed limit. Press and hold the mute button on the steering wheel to easily switch to the speed limit information function.
• Speed limit tolerance: Provision of a warning and adjustment of the vehicle's set speed based on the current road's speed limit and the selected offset.

DAW (Driver attention warning)

The properties of the DAW (Driver Attention Warning) system

• Leading vehicle departure alert: Notification of the driver when the leading vehicle drives on
• Forward attention warning: Provision of a warning when the driver is not looking forward
Warning
Be sure to always check the road conditions ahead or surroundings before departure. An accident caused by distracted driving can be prevented.

Driving safety

The properties of the Driving Safety system

• Forward safety: Assistance in collision avoidance. The system provides a warning and actively controls the vehicle when a risk of forward collision is detected.
• Forward safety warning timing: The timing of the forward safety system warnings
• Lane safety: Automatic adjustment of the steering wheel to keep the vehicle within the boundaries of its lane
• Blind-spot view monitor: Display of blind-spot view in the cluster when operating the turn indicator
• Blind-spot safety: Warning on detection of a risk of blind-spot collision, and automatic vehicle control while departing a parallel parking spot
• Safe exit: Provision of a warning and door control when a risk of blind-spot collision is detected while exiting the vehicle

Parking safety

Properties of the Parking Safety systems

• Camera settings: The properties of the camera
• Surround view monitor auto On: Automatic activation of the surround view monitor when the parking distance warning is active
• Auto PDW (Parking Distance Warning): Automatic activation of PDW (Parking Distance Warning) at low speeds
• Forward/Side safety: Collision avoidance by provision of a warning and vehicle control when a risk of forward or side collision is detected
• Rear safety: Provision of a warning and vehicle control when a risk of collision is detected while reversing
• Rear cross-traffic safety: Provision of a warning and vehicle control when a risk of rear cross-traffic collision is detected while reversing

Warning

• Even if your vehicle is equipped with a driver assistance system, always check for objects around the vehicle when driving or parking. Relying on the Parking Safety system may cause an accident. Accordingly, be sure to control the vehicle by your judgement.
• When the sensors cannot detect any obstacles due to the detection limit, it may cause an accident. Be sure to always check the surroundings while parking.

Drive mode (if equipped)

You can change the vehicle settings for driving conditions.

Available settings may differ depending on the vehicle model and specifications.

MY DRIVE MODE

A personalised drive mode based on user selection of modes for various systems

Brake mode

Automatic selection of the brake mode (feel, responsiveness, etc.) optimised for your driving style.

Drive mode change alert

A change of the drive mode is shown by a detailed image of the vehicle.

VGS (Virtual Gear Shift)

Virtual Gear Shift recreates the feeling of driving a vehicle equipped with a combustion engine and transmission.

N e-Shift

N e-Shift recreates the feeling of driving a vehicle equipped with a combustion engine and transmission. N e-Shift is not available in ECO mode.

ECO mode climate control

Decrease the energy consumption by reducing the heating and cooling power of the climate control system.

Coasting

Engine is decoupled from the trans-mission during coasting for fuel economy in ECO and SMART modes.

Eco vehicle (if equipped)

Set the convenience features available for ECO vehicles.

Available settings may differ depending on the vehicle model and specifications.

Coasting guidance

The coasting guidance helps the driver to save fuel by recommending when to remove his foot from the accelerator pedal.

Coasting timing

Setting of the timing of the coasting guidance.

Green Zone EV Drive

Maximum use of EV driving to protect the environment.

Active sound design (if equipped)

A synthetic driving sound for EVs. Please select a volume.

Available settings may differ depending on the vehicle model and specifications.

N Active Sound+ (if equipped)

Select the preferred N Active Sound+ settings for this electric vehicle.

• Ignition: Enhance the connection between the driver and vehicle with the N RPM simulation of an internal combustion engine.
• Evolution: Experience the emotions evoked by the evolutionary sound of a futuristic, high-performance electric vehicle.
• Supersonic: Experience the intense sound inspired by the propulsion power of a supersonic fighter jet.
• Off: Deactivation of the N Active Sound+ function

Available settings may differ depending on the vehicle model and specifications.

Climate (if equipped)

You can configure the operation environment for climate control system.

Available settings may differ depending on the vehicle model and specifications.

Air recirculation

Blocking of outside air intake into the vehicle cabin

Automatic ventilation

Automatic switching to outside (fresh) air ventilation after an extended use of internal air circulation

Defog/Defrost options

The air conditioner is automatically operated to create a flow of air to clear the windscreen.

Climate features

Climate control/Convenience functions

Warmer/ventilation based on climate settings

Automatic adjustment of the driver seat warmer/ventilation feature based on the climate settings

Seats (if equipped)

You can set to use various features (motions and warmer control for the driver's seat, rear seat, and steering wheel) that are related to the seats and steering wheel.

Available settings may differ depending on the vehicle model and specifications.

Warmer/Ventilation features

Activation and adjustment of the seat warmer/ventilation convenience functions

Warmer/ventilation based on climate settings

Automatic adjustment of the driver seat warmer/ventilation feature based on the climate settings

Seat easy access

Automatic movement of seat/steering wheel to provide easier entry/exit for driver and passenger

Seat position change alert

Details of seat position changes are displayed along with related seat images.

Smart posture care

The driver's seated posture is analysed based on the current seat position and body information entered. An analysis of this posture relative to back health is provided, and a seating position based on the driver's body type is recommended. The driver can assign this recommended position to a button.

Comfortable stretch activity notification

When comfortable stretch is activated, operating information is displayed along with a seat image.

Lights (if equipped)

You can configure the settings for vehicle lights.

Available settings may differ depending on the vehicle model and specifications.

Ambient light

Setting of the vehicle cabin's ambient light

• Brightness: Adjust the brightness of the cabin's ambient light
• Colour: Adjusts the colour of the ambient light.
• Link to drive mode: The colour of the ambient light changes according to the selected drive mode.
• Dimming under darkened conditions: Automatic dimming of the ambient light under darkened conditions.
• Sync light with speed: The brightness of the ambient lighting is adjusted based on the vehicle speed.

One-touch turn indicator

Definition of the number of times the turn indicator blinks when the lever is moved slightly

Welcome mirror/light

The condition under which the outside mirrors will unfold and the puddle or door handle lights will turn on automatically.

Headlight time-out

The exterior lights turn Off approximately 15 seconds after leaving the vehicle and closing the doors.

Lighting pattern

The type of lighting to be used for the dynamic welcome light. The selected pattern will be applied at the next vehicle start-up.

HBA (High Beam Assist)

Assistance in reducing high beam glare to oncoming vehicles

Interior lights On

The button and switch lights will stay illuminated, even in daylight conditions.

Doors (if equipped)

You can configure the operation environment for the trunk (tailgate) and doors.

Available settings may differ depending on the vehicle model and specifications.

Auto lock

Definition of a condition for all doors to be locked automatically

Auto unlock

Definition of a condition for all doors to be unlocked automatically

Two press remote unlock

All doors are unlocked when the unlock button is pressed twice. (Single press unlocks driver door only)

When you press the door unlock button once, only the driver's seat door is unlocked.

Unlock on approach or touch

Select the doors to unlock when the driver approaches the vehicle with the Smart Key or presses the door handle button.

Walk-away lock

All doors will lock when the Smart Key is no longer nearby.

Horn feedback

Provision of an audible alert that the door has been locked

Power Tailgate

Press [Power Tailgate] to automatically open or close the boot.

Power Tailgate Opening Speed

Definition of the Power Tailgate opening and closing speed.

Power Trunk Opening Height or Power Tailgate Opening Height

The height, the power trunk (tailgate) automatically moves on opening.

The displayed name may differ depending on the vehicle model and specifications.

Smart Trunk or Smart Tailgate

The boot (tailgate) will be automatically opened when approaching the boot (tailgate) with the Smart Key.

The displayed name may differ depending on the vehicle model and specifications.

Remote window control

Enable/disable the remote window control function.

Digital key (if equipped)

Available settings may differ depending on the vehicle model and specifications.

Smartphone key

Setting of the smartphone key

• My Smartphone Key: Saving/deleting of My Smartphone Key
• Shared keys: Display of shared smartphone keys
- A digital key can be shared by a maximum of three smartphones. Ensure the smartphones were made by the same manufacturer.

NFC card key

Saving or deleting an NFC card key

• Enable card key: Start the vehicle and lock/unlock doors using a card key.

Digital key information

Shows the serial number of the authentication controller.

Convenience (if equipped)

You can configure the features for convenience such as wireless charging.

Available settings may differ depending on the vehicle model and specifications.

Rear occupant alert

An alert to the driver, that passengers are in the rear seat of the vehicle

Service interval

An alert is displayed when a specified service interval is due.

• Enable service interval: An alert is displayed when a specified service interval is due.
• Distance: The service interval reminder distance.
• Interval: The service interval reminder time.

To initialise all service interval reminder settings, press Reset.

Oil change reminder

Display remaining life of engine oil. Reset manually after oil change. Check the oil level separately.

Wireless charging system for mobile devices

Wireless charging of compatible devices

Mobile phone wireless charging indicator

Choose the indicator display type when a mobile phone is being charged using the wireless charging pad.

Auto rear wiper (reverse)

Rear wiper will automatically wipe if the front wipers are On and the gear position is in reverse.