Setup

Phone connection

Bluetooth

This menu describes Bluetooth phone settings.

Bluetooth connections

This menu is used to pair and connect the head unit and a Bluetooth phone.

Press [SETUP] > [Phone connection] > [Bluetooth] > [Bluetooth connections].

58031.png

1 Paired device list

Displays the paired Bluetooth device list. When selecting from the list, the device is either connected or disconnected.

2 Bluetooth audio and hands-free connection status

An icon appears when you make a Bluetooth audio and hands-free connection.

3 [Add new]

Registers a new Bluetooth device.

4 [Delete devices]

Moves to the [Delete devices] menu.

Message notification

You can check message notification.

Press [SETUP] > [Phone connection] > [Bluetooth] > [Message notification]. Check to see the notification pop-ups for received messages.

AC3_ENG_174-1_200519.png

Predefined messages

You can check the messages already registered.

  1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Predefined messages].

AC3_ENG_174-2_200519.png

  1. You can select the desired message in [Text message replies] or [Replies to rejected calls].

Privacy mode

You can set privacy mode to protect your personal data. Contacts, call history, favourites and messages are not displayed when privacy mode is activated.

  1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Privacy mode].

AC3_ENG_175-1_200519.png

  1. Check [Privacy mode].

Bluetooth System info

Vehicle name

You can change the Bluetooth device name of the vehicle.

  1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Bluetooth system info] > [Vehicle name].

AC3_ENG_175-2_200519.png

  1. Enter the desired name using the keypad, then press [OK].

,Note

The default vehicle name is set to the name of the vehicle you purchased.

Passkey

You can change the passkey used for Bluetooth device authentication.

  1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Bluetooth system info] > [Passkey].

AC3_ENG_176_200519.png

  1. Enter the passkey using the keypad.

,Note

The passkey is a 4-digit authentication code used for a Bluetooth connection between the mobile phone and car system. The default passkey is set to 0000.

Default

This menu is used to reset the Bluetooth settings to factory default.

Press [SETUP] > [Phone connection] > [Bluetooth] > [Reset] > [Yes].

Phone projection

In this menu Android Auto and Apple CarPlay can be enabled by setting a checkmark.

  1. Press [SETUP] > [Phone connection].

AC3_ENG_177_200519.png

  1. Press the desired items.