Configuring the vehicle settings

You can configure the functions for driving and related environments.

Caution

Make sure you stop the vehicle before changing settings to ensure safety.

Vehicle settings can be changed only when the vehicle is on.
Depending on the climate control system, some functions may not be supported.

On the All menus screen, press Settings ▶ Vehicle.
The vehicle settings screen appears.
- The screen may differ depending on the vehicle model and specifications.
Configure the settings required:

Press ▶ Search for settings or press and enter a keyword to search for a setting item. You can also search for a setting item by voice.

Driver assistance (if equipped)

You can set to use various systems that assist the driver for safety.

The screen may differ depending on the vehicle model and specifications. Refer to the car owner's manual for details of the function.

Warning

• Be sure to always check the road conditions while driving. The Driver Assistance system helps you drive safely and conveniently. Relying solely on the function may cause violation of traffic rules and regulations, resulting in an accident.
• Be sure to control the vehicle using your best judgement and follow traffic regulations for safety. When the function is active, drive the vehicle keeping your eyes forwards and checking surroundings.
• Not all warnings and functions are necessary when they are active, and they do not replace driver discretion under any circumstances. Stay focused on the road while driving.

Caution

Be sure to always check the vehicle surroundings while driving. The equipped cameras and sensors may not operate properly under all driving conditions.

Warning methods (if equipped)

Sets the volume and priority of the warning sound for driver assistance. You can configure the haptic warning settings if steering wheel vibration warning is supported.

• Warning volume: Sets the volume of the warning sound.
• Driving safety priority: Lowers all other audio volumes when a driving safety system sounds a warning.
• Parking safety priority: Lowers all other audio volumes when a parking assist view is active.

DAW (Driver Attention Warning) (if equipped)

Sets the properties of the Driver Attention Warning system.

• Leading vehicle departure alert: Alerts the driver during a stop, when the leading vehicle departs.

Driving safety (if equipped)

Configure driving-related safety features.

• Forward safety: Provides a warning and vehicle control when a risk of forward collision is detected.
• Fwd safety warning timing: Select when the forward safety system will activate a warning.
• Lane safety: Automatically assists with steering to help prevent the vehicle from leaving the lane.

Parking safety (if equipped)

Sets the properties of the Parking Safety systems.

• Parking distance warning auto on: Automatically activates Parking Distance Warning when travelling at low speeds.

Cluster (if equipped)

You can set the data to display on the instrument cluster and the volume and type for guiding beep.

The screen may differ depending on the vehicle model and specifications.

Select theme (if equipped)

Select and apply a theme to the cluster.

3D cluster (if equipped)

Set the cluster to display information in 3D mode.

Reset fuel economy (if equipped)

Select which average fuel economy to display on the cluster.

• On vehicle start: Displays the fuel economy after engine restart.
• After refuelling: Displays the fuel economy after refuelling.
• Manually: Displays the accumulated fuel economy.

Content selection (if equipped)

You can set the content to display on the instrument cluster.

• Wiper/Lights display: When the wiper or light lever operates, the operation mode appears.
• Traffic signs: Displays the road information such as speed bumps and speed limits.
• Icy road warning: When the outside temperature drops below 4 °C (39 °F), the possibility of road icing appears.

Cluster voice guidance volume (if equipped)

You can adjust the voice guidance volume of the cluster.

Welcome sound (if equipped)

You can set to generate the notification sound when turning on or off the instrument cluster.

Climate (if equipped)

You can configure the operation environment for climate control system.

The screen may differ depending on the vehicle model and specifications.

Internal air circulation (if equipped)

You can set to keep the inside air pleasant by blocking inflow of outside air.

• Activation on washer fluid use: Sets to automatically switch to the inside air circulation mode to prevent inflow of washer fluid scent when spraying washer fluid.
• Activation on external dust concentration: Sets to automatically switch to the air purification mode to keep inside air pleasant when the fine dust index is high.

Automatic ventilation (if equipped)

You can set to prevent condensation inside and keep inside air pleasant using this feature.

• Auto dehumidify: Once the inside air circulation mode has been used for a long time, it is switched to the outside air inflow mode to prevent condensation.
• Smart ventilation: Sets to automatically switch to the outside air inflow mode to maintain a pleasant indoor environment when the humidity increases in the vehicle with the climate system off.
• Carbon dioxide reduction: Sets to automatically switch to the outside air inflow mode to maintain a pleasant indoor environment when the concentration increases in the vehicle with the climate system off.
• Scheduled ventilation: Automatically ventilates the cabin at the scheduled time. Ventilation occurs while the vehicle is off.

Defog/Defrost options (if equipped)

You can set to enable the defogger to secure driver visibility.

• Defog/Defrost: When the sensor detects humidity on the windshield and glasses, it enables the outside air inflow mode and air conditioner for defogging and defrosting.
• Auto defog: When the sensor detects fog on the windshield, the automaticv entilation is run for defogging.

Climate features (if equipped)

You can set or change the settings for the climate system.

• Air conditioner auto-drying: You can set the climate control system to dry the air conditioner by running when the engine is stopped.

Seat (if equipped)

You can set to use various features (motions and warmer control for the driver's seat, rear seat, and steering wheel) that are related to the seats and steering wheel.

The screen may differ depending on the vehicle model and specifications.

Seat position change alert (if equipped)

You can set the system to display a notification message along with the seat image on the screen when a seat position is changed.

Warmer/Vent. features (if equipped)

You can set to make the driving environment pleasant by controlling the steering wheel warmer and driver's seat warmer/ventilation.

• Link to climate settings for auto-adjustment: Automatically controls the heating wire or ventilation for the driver's seat and steering wheel, in sync with the climate control function.
- Steering wheel warmer: Steering Wheel Warmer adjusts automatically based on Climate settings.
- Driver seat warmer/ventilation: Seat Warmer/Ventilation adjusts automatically based on Climate settings.

Seat Easy Access (if equipped)

For convenience upon getting on and off, you can adjust the position of the driver's seat or steering wheel to secure space inside the vehicle.

• Easy seat (fwd/bwd) access: Can set the distance to automatically move the driver's seat when getting on or off.
• Easy seat (up/down) access: Can set to automatically move the driver's seat when getting on or off.
• Steering easy access: The steering wheel moves upward when getting on and off.

Lights (if equipped)

You can configure the settings for vehicle lights.

The screen may differ depending on the vehicle model and specifications.

Ambient light (if equipped)

You can set the brightness and colour of the ambient light.

• Brightness: To change the brightness of Ambient light.
• Colour: To change to desired colour of Ambient light.
• Link to drive mode: Ambient light colour changes according to the drive mode (If equipped).
• Dimmed in dark: Ambient light intensity will be dimmed in dark conditions

One-touch turn indicator (if equipped)

You can set the number of turn signal lamp flashes when the lamp lever is operated.

Welcome mirror/light (if equipped)

You can set the welcoming time on the outside rear view mirrors.

• On door unlock: The welcome feature is enabled by the door unlock event.
• On driver approach: When the driver with the smart key approaches, the welcome feature is enabled.

Headlight time-out (if equipped)

You can set to turn off the tail lights and Head lights in 15 seconds after turning off the vehicle to ensure visibility.

HBA (High Beam Assist) (if equipped)

You can set to automatically control the high beam when an oncoming vehicle is approaching to decrease the high beam glare.

Door (if equipped)

You can configure the operation environment for the tailgate and doors.

The screen may differ depending on the vehicle model and specifications.

Auto lock (if equipped)

You can set the condition to automatically lock all doors.

Auto unlock (if equipped)

You can set the condition to automatically unlock all doors.

Two Press Unlock (if equipped)

You can set to unlock all doors by pressing the door unlock button twice.

When you press the door unlock button once, only the driver's seat door is unlocked.

Power tailgate (if equipped)

Open or close the tailgate automatically using the power tailgate button.

Power tailgate opening speed (if equipped)

Set the opening speed for the power tailgate.

Power tailgate opening height (if equipped)

Set the opening height for the power tailgate.

Tailgate auto close (if equipped)

Set the tailgate to automatically close when you move away from the back of the tailgate while carrying the smart key.

Convenience (if equipped)

You can configure the features for convenience such as welcome sound and wireless charging.

The screen may differ depending on the vehicle model and specifications.

Service interval (if equipped)

You can set to guide you when to perform the vehicle inspection.

• Enable service interval: Sets the service inspection interval. When it exceeds, the notification is provided.
• Distance: Sets the driving distance for a service.
• Duration: Sets the service cycle.
• Default: Initialises the settings for distance and duration.

Wireless charging system for mobile devices (if equipped)

You can set to charge your smartphone wirelessly.

This feature is available only in smartphones that can be charged wirelessly.

Auto rear wiper (reverse) (if equipped)

Activates the rear windshield wiper automatically when the front wiper is On and the gear is in reverse.

Digital side mirrors (if equipped)

Configure the digital side mirror view settings.