Configuring the vehicle settings

You can configure the functions for driving and related environments.

Caution

Make sure you stop the vehicle before changing settings to ensure safety.

Vehicle settings can be changed only when the vehicle is on.
Available settings may differ depending on the vehicle model and specifications.
Depending on the climate control system, some functions may not be supported.

On the All Menus screen, press Setup ▶ Vehicle.
The vehicle settings screen appears.
Configure the settings required:

Press ▶ Search for Settings or press and enter a keyword to search for a setting item.

Driver Assistance (if equipped)

You can set to use various systems that assist the driver for safety.

The screen may differ depending on the vehicle model and specifications. Refer to the car owner's manual for details of the function.

Warning

• Be sure to always check the road conditions while driving. The Driver Assistance system helps you drive safely and conveniently. Relying solely on the function may cause violation of traffic rules and regulations, resulting in an accident.
• Be sure to control the vehicle by your judgment and keep traffic regulations for safety. When the function is active, drive the vehicle with keeping eyes forward and checking the surroundings.
• Not all warnings or functions are necessary when they are active, and they do not replace the driver discretion under any circumstances. Stay focused on the road while driving.

Caution

Be sure to always check the vehicle surroundings while driving. The equipped cameras and sensors may not operate properly under all driving conditions.

SCC Reaction (if equipped)

Adjusts the responsiveness of Smart Cruise Control to the acceleration of a leading vehicle.

Smart Cruise Control (if equipped)

Configure the smart cruise control linkage or style settings.

• Based on Driving Style: Automatically adjusts the Smart Cruise Control system settings based on driving style.

Warning Volume (if equipped)

You can adjust the warning volume by the driving assist system.

Haptic Warning (if equipped)

Set to enable haptic feedback on the steering wheel to alert on safety system warnings such as forward collision warning.

Driver Attention Warning (if equipped)

Sets the timing of the warning.

• Leading Vehicle Departure Alert: Alerts the driver during a stop, when the leading vehicle departs.

Warning

Be sure to always check the road conditions ahead or surroundings before departure. An accident caused by distracted driving can be prevented.

• Inattentive Driving Warning: Provides a warning when signs of driver inattentiveness are detected, and recommends a rest if needed.

Driving Safety (if equipped)

Configure the driving safety system settings.

• Forward Safety: Provides a warning and vehicle control when a risk of forward collision is detected.
• Forward Safety Warning Timing: Set the warning activation time for the forward safety system.
• Forward Cross-Traffic Safety: Provides a warning and emergency braking when a risk of forward cross-traffic collision is detected.
• Forward/Side Safety: Provides a warning and emergency braking when a risk of forward or side collision is detected.
• Lane Safety: Automatically assists with steering to help prevent the vehicle from leaving the lane.
• Blind-Spot Safety: Provides a warning when there is a risk of collision with blind-spot traffic, and controls the vehicle to assist the driver in avoiding collisions when exiting a parking space.
• Blind-Spot View Monitor: Displays the blind-spot view in the cluster when operating the turn signal switch.
• Exit Safety: Provides a warning and door control when an approaching vehicle is detected in the vehicle's blind spot.

Parking Safety (if equipped)

Sets the properties of the Parking Safety systems.

• Camera Settings: Sets the properties of the cameras (if equipped).
- Display Contents: Specify information that will be displayed on the view screen. Setting items may differ depending on the vehicle model and camera type.
- Display Settings: Adjust the brightness and contrast of the view screen. To initialize all Surround View or Rear View screen settings of the phone projection, press Reset.
• Surround View Monitor Auto On: Automatically activates Surround View Monitor when Parking Distance Warning is active (if equipped).
• Parking Distance Warning Auto On: Automatically activates Parking Distance Warning when traveling at low speeds.
• Rear Safety: Provides a warning and emergency braking when a risk of rear collision is detected while reversing.
• Off: Disables Parking Safety functions.
• Rear Cross-Traffic Safety: Provides a warning when a risk of rear cross-traffic collision is detected while reversing.

Warning

• Even though the vehicle is equipped the Parking Safety system, be sure to check any obstacles in the surroundings while driving. Relying on the Parking Safety system may cause an accident. Accordingly, be sure to control the vehicle by your judgment.
• When the sensors cannot detect any obstacles due to the detection limit, it may cause an accident. Be sure to always check the surroundings while parking.

Drive Mode (if equipped)

You can change the vehicle settings for driving conditions.

The screen may differ depending on the vehicle model and specifications.

Tow Mode (if equipped)

Set the trailer weight to refer to when entering tow mode.

Active Sound Design (if equipped)

Turn on or off the engine sound function which generates a virtual engine sound.

The screen may differ depending on the vehicle model and specifications.

Active Noise Control (if equipped)

Reduces noise when driving.

Head-Up Display (if equipped)

You can set to use the head-up display that displays information such as driving speed and road-related information while driving.

The screen may differ depending on the vehicle model and specifications.

Enable Head-Up Display (if equipped)

Can determine whether or not to use the head-up display.

Display Control (if equipped)

Adjust the height, rotation, and brightness of the head-up display.

Content Selection (if equipped)

Select the items to display on the head-up display.

Cluster (if equipped)

You can set the data to display on the instrument cluster and the volume and type for guiding beep.

The screen may differ depending on the vehicle model and specifications.

Cluster Theme Selection (if equipped)

Select and apply a theme to the cluster.

Service Interval (if equipped)

You can set to guide you when to perform the vehicle inspection.

• Enable Service Interval: Sets the service inspection interval. When it exceeds, the notification is provided.
• Distance: Sets the driving distance for a service.
• Duration: Sets the service cycle.
• Reset: Initializes the settings for distance and duration.

Reset Fuel Economy

Select which average fuel economy to display on the cluster.

• At vehicle start: Displays the fuel economy after engine restart.
• After refueling: Displays the fuel economy after refueling.
• Manually: Displays the accumulated fuel economy.

Content Selection (if equipped)

You can set the content to display on the instrument cluster.

• Wiper/Lights Display: When the wiper or light lever operates, the operation mode appears.
• Traffic Signs: Displays the road information such as speed bumps and speed limits.
• Blind-Spot View Monitor: Displays the blind spot view on the instrument cluster when the turn signal lamp is blinking.
• Icy Road Warning: When the outside temperature drops below 4 ℃ (39 °F), the possibility of road icing appears.

Cluster Voice Guidance Volume (if equipped)

You can adjust the volume of guiding beep.

Welcome Sound (if equipped)

You can set to generate the notification sound when turning on or off the instrument cluster.

Climate (if equipped)

You can configure the operation environment for climate control system.

The screen may differ depending on the vehicle model and specifications.

Recirculate Air (if equipped)

You can set to keep the inside air pleasant by blocking inflow of outside air.

• Activate upon Washer Fluid Use: Sets to automatically switch to the inside air circulation mode to prevent inflow of washer fluid scent when spraying washer fluid.
• Tunnel: Automatically prevents entry of outside air when entering a tunnel.
• Others: Automatically prevents entry of outside air when it is necessary (if equipped).

Automatic Ventilation (if equipped)

You can set to prevent condensation inside and keep inside air pleasant using this feature.

• Auto Dehumidify: Once the inside air circulation mode has been used for a long time, it is switched to the outside air inflow mode to prevent condensation.
• Scheduled Ventilation: Automatically ventilates the cabin at the scheduled time. Ventilation occurs while the vehicle is off.

Defog/Defrost Options (if equipped)

You can set to enable the defogger to secure driver visibility.

• Defog/Defrost: When the sensor detects humidity on the windshield and glasses, it enables the outside air inflow mode and air conditioner for defogging and defrosting.
• Auto Defog: When the sensor detects fog on the windshield, the automatic ventilation is run for defogging.

Climate Features (if equipped)

You can set or change the settings for the climate system.

• A/C Automatic Drying: You can set the climate control system to dry the air conditioner by running when the engine is stopped.
• Lock Rear Climate Controls: Prevents changes to the climate control system from rear seats.

Warmer/Ventilation Features (if equipped)

You can set to make the driving environment pleasant by controlling the steering wheel warmer and driver's seat warmer/ventilation.

• Link to Climate Settings for Auto-Adjustment: Automatically controls the heating wire or ventilation for the driver's seat and steering wheel, in sync with the climate control function.
- Steering Wheel Warmer: Steering Wheel Warmer adjusts automatically based on Climate settings.
- Driver Seat Warmer/Ventilation: Seat Warmer/Ventilation adjusts automatically based on Climate settings.

Seat (if equipped)

You can set to use various features (motions and warmer control for the driver's seat, rear seat, and steering wheel) that are related to the seats and steering wheel.

The screen may differ depending on the vehicle model and specifications.

Seat Position Change Alert (if equipped)

You can set the system to display a notification message along with the seat image on the screen when a seat position is changed.

3rd Row Seat Back Folding (if equipped)

You can fold or unfold the left or right seat back of the 3rd row seat.

• Fold: Can fold the 3rd row rear seat backs.
• Unfold: Can unfold the 3rd row rear seat backs.

Smart Posture Care (if equipped)

You can see the recommended driving posture according to your physical data, and the clinical inspection result for your waist.

Warmer/Ventilation Features (if equipped)

You can set to make the driving environment pleasant by controlling the steering wheel warmer and driver's seat warmer/ventilation.

• Link to Climate Settings for Auto-Adjustment: Automatically controls the heating wire or ventilation for the driver's seat and steering wheel, in sync with the climate control function.
- Steering Wheel Warmer: Steering Wheel Warmer adjusts automatically based on Climate settings.
- Driver Seat Warmer/Ventilation: Seat Warmer/Ventilation adjusts automatically based on Climate settings.

Seating Easy Access (if equipped)

For convenience upon getting on and off, you can adjust the position of the driver's seat or steering wheel to secure space inside the vehicle.

• Seat Slide Easy Access: Can set the distance to automatically move the driver's seat when getting on or off.
• Seat Height Easy Access: Can set to automatically move the driver's seat when getting on or off.
• Steering Easy Access: The steering wheel moves upward when getting on and off.

Smart Support (if equipped)

Configure the setting so that this feature works when the sport mode or the highway driving assist feature is turned on.

Ergo-Motion Seat (if equipped)

Reduces occupant fatigue and improves ride comfort and safety while driving by ergonomically using seat movements.

Lumbar Stabilization System while driving (if equipped)

Adjust the seat position to protect your back and ease your back pain while driving.

Lights (if equipped)

You can configure the settings for vehicle lights.

The screen may differ depending on the vehicle model and specifications.

Ambient Light (if equipped)

You can set the brightness of the ambient light.

To turn off the interior mood lamp, adjust the brightness to 0.

One Touch Turn Signal (if equipped)

You can set the number of turn signal lamp flashes when the lamp lever is operated.

Welcome Mirror/Light (if equipped)

You can set the welcoming time on the outside rear view mirrors.

• Enable on Door Unlock: The welcome feature is enabled by the door unlock event.
• Enable on Driver Approach: When the driver with the smart key approaches, the welcome feature is enabled.

Headlight Delay (if equipped)

You can set to turn off the taillights and headlights in 15 seconds after turning off the vehicle to ensure visibility.

High Beam Assist (if equipped)

You can set to automatically control the high beam when an oncoming vehicle is approaching to decrease the high beam glare.

Interior Lights Always On (if equipped)

Illuminates the interior buttons and switches at all times.

Door (if equipped)

You can configure the operation environment for the trunk and doors.

The screen may differ depending on the vehicle model and specifications.

Auto Lock (if equipped)

You can set the time to automatically lock all doors.

Auto Unlock (if equipped)

You can set the time to automatically unlock all doors.

Horn Feedback (if equipped)

You can set to generate guiding beep when all doors are locked.

2 Press Unlock (if equipped)

You can set to unlock all doors by pressing the door unlock button twice.

When you press the door unlock button once, only the driver's seat door is unlocked.

Power Tailgate (if equipped)

The Power tailgate button can be used to automatically open/close the tailgate.

The displayed name may differ depending on the vehicle model and specifications.

Power Tailgate Opening Speed (if equipped)

Selects the speed the power tailgate automatically moves.

The displayed name may differ depending on the vehicle model and specifications.

Power Tailgate Opening Height (if equipped)

Set the opening height for the power tailgate.

The displayed name may differ depending on the vehicle model and specifications.

Smart Tailgate (if equipped)

Opens the tailgate automatically when approaching the tailgate with the smart key.

Remote Window Control (if equipped)

Turns on the remote window control function.

Digital Key (if equipped)

You can register or delete a digital key and then see the information of the registered digital key.

The screen may differ depending on the vehicle model and specifications.

Smartphone Key (if equipped)

You can register or delete a smartphone key.

Card Key (if equipped)

You can register or delete a card key.

Digital Key Information (if equipped)

You can see the serial number of the registered digital key.

Convenience (if equipped)

You can configure the features for convenience such as welcome sound and wireless charging.

The screen may differ depending on the vehicle model and specifications.

Rear Occupant Alert (if equipped)

Movement is detected by the rear-seat sensor after the doors are locked.

Service Interval (if equipped)

You can set to guide you when to perform the vehicle inspection.

• Enable Service Interval: Sets the service inspection interval. When it exceeds, the notification is provided.
• Distance: Sets the driving distance for a service.
• Duration: Sets the service cycle.
• Reset: Initializes the settings for distance and duration.

Wireless Charging System (if equipped)

You can set to charge your smartphone wirelessly.

This feature is available only in smartphones that can be charged wirelessly.

Auto Rear Wiper (in R) (if equipped)

Activates the rear windshield wiper automatically when the front wiper is On and the gear is in reverse.