Using Rear Camera (If equipped)

About Rear Camera

Rear camera is a feature for the customers who select an option.
The rear camera provides a view of the rear of the vehicle when reversing.
When the shift lever is placed in R with the vehicle’s ignition turned on, the rear camera will operate.
If you change the shift lever location from R to another position than P, the rear camera stays turned on. But the rear screen will remain until you enter the hard key or drive at a speed of 10 km/h or more. (Only if the option to keep the rear camera view is supported.)
On the rear camera screen, the guideline for parking is displayed, moving depending on the direction of the steering wheel.

Turning on the rear camera

When the vehicle is started, putting the transmission lever to the R position.

The rear camera has a wide angle lens to provide a wide view, so the distance shown on the screen differs from the actual distance. For your safety, always check the rear, left and right views when reversing.

About DRV (Driving Rear View)

This function allows you to view the rear of the vehicle while driving through the rear camera mounted on the vehicle.

Operating DRV

After turning on the engine, putting the lever of the transmission in the N or D position and press the Camera switch to start DRV.

If you drive at about 10 km/h or more during DRV operation, DRV is turned off. At this state, even if you drive at less than about 10 km/h, DRV is remained at OFF state.

About PDW (Parking Distance Warning) (If equipped)

This function displays you a warning when an object is detected around the vehicle.

To set brightness or contrast, press . It goes to the brightness/contrast setting mode. You can set the brightness or contrast.

About Trailer View Mode (If equipped)

It shows you the view from each other camera.

To switch the view to the other cameras, touch the camera view button [] and press [] to switch to the trailer mode view or press [] to switch to the parking assist wide view.
If there is no control for a while, [] disappears from the screen automatically.